Plicast LWI 24 insulating refractory castable with moderate density and adequate strength that is suitable for use as either as an efficient backup insulating component, or as a primary lining material. Can be used as insulation for pizza ovens. FREE Shipping.

Plicast® LWI® 24 is the workhorse of Plibrico’s insulating refractory castables.   A service limit of 2450°F, moderate density, and adequate strength, make this material suitable for use as either as an efficient backup insulating component, or a primary lining material in less demanding, moderate temperature applications.   Product advantages include:

• Good strength
• 2450°F service limit
• Medium density ~80 pcf
• Moderately low thermal conductivity
• Good volume stability
• Good casting consistency
• Good product storage life: 12 mo

This conventional dry mix castable is ideal for reheat, car bottom and bottom annealing furnaces (as backup insulation), boilers, incinerators and thermal oxidizers, aluminum furnaces (upper wall and backup insulation) mineral processing kilns (backup insulation). Can also be used as a back up product for an outdoor pizza oven (insulation under the hearth, or over the dome). 

For technical data sheet click here. 

Mix 6.4-7.2 quarts of water per bag for casting. You'll need 80 lbs. per cu. ft. of product in service. Available in a 55 lb. bag. Mix with a minimum of 6.4 quarts of water per bag for casting.  

Safety data sheets are available on request. Always follow manufacturer's instructions. Wear goggles, gloves and a mask. 

Remember, shipping is FREE for all orders (contiguous US only).